Non-Destructive Testing (NABL Accredited Laboratory)
The durability of existing structures always depends upon the properties of hardened concrete, steel, brick, timber and their connections. To find the safety of any existing concrete structures, we need a set of tests to evaluate the safety parameters. Non-destructive tests are that kind of tests, which place a vital role in evaluation of existing structures regarding their strength and durability. KBPCES brings an unparalleled capability in assisting clients in the process of understanding the condition of structures through our ability to combine our Engineering Expertise with Market leading suite of destructive and non-destructive field and laboratory tests. KBPCES provides a wide range of destructive and non-destructive tests to characterize critical structural properties. These include:
 
✔ Rebound Hammer Test: Convenient and Rapid Indication of           Surface Compressive Strength Up To 50mm Depth of Concrete.
✔ Half-Cell Potential Test: Determination of Corrosion Activity      / Percentage of Corrosion the Reinforcing Steel in RCC Members.
✔ Flat Jack Test: To Determine the Acting Stresses (Single Flat      Jack) Or to Evaluate the Mechanical Parameters of The                  Masonry/Concrete Structures.
✔ Vibration Test: To measure Structural Displacement,                Acceleration (Vibration) under the given loading condition.
✔ Ultrasonic Thickness Gauge: Rapid Non-Destructive Accurate        Thickness Testing of Metal Structural Members.
✔ Moisture Test: To identify source of the leakages and              dampness place by using moisture meter. This measure moisture          percentage.
✔ Carbonation Test: To Determining the Depth of The Carbonated      Layer on The Surface of Hardened Concrete by Means of An              Indicator called as phenolphthalein.
✔ Chemical Test (Sulphate / Chloride Content/PH): To determine      percentage of chloride/ Sulphate content in concrete and testing      PH Value of concrete.
✔ Infrared Thermometer Test: To Monitoring or control                Temperatures in building structures Using IR Thermometers.
✔ Concrete Core Compression Test: To Extract Concrete Core and      Test for The Determination of Compressive Strength and Quality of      hardened Concrete in The Structure.
✔ Rebar Location & Cover Meter Test: Used to Specify the            Location of Reinforcement Bars in Concrete and Determine the          Exact Concrete Cover provided to reinforcement.
✔ Pile Integrity Test: To Measure Cross-Sectional Area, Length,      Continuity and Consistency of The Pile. Integrity testing of Pile      to discover any flaws before they can cause any damage.
✔ Micro-Drill Test on Timber: To Assess the condition of timber      member and joints for identify voids, decay, insect damage, and        cracks.
✔ Drone Camera Inspection: To inspect the inaccessible              structures like Transmission Towers, Chimneys, Bridges, Tall          structures, Multi storey buildings
✔ Endoscopy / Bore scope Camera Inspection: To inspect the in-      accessible areas of structures, building components, Heritage          structures, pipes etc.
✔ Underwater Inspection: To inspect underwater structures such      as Bridge piers, Pile foundations, Dam, underground Water tanks        by remotely operated vehicles.
✔ Slab Load Test: To evaluation of strength/ Capacity of            concrete structures (flexural members & Bridges) by using              physical load test method.
✔ Ground Penetrating Radar Test: To Locate defects in the            underground structures, Locate underground objects, Utilities by      using high frequency radio waves.
✔ Magnetic Particle Inspection of welding: For detecting            surface discontinuities such as crack which are impossible to see      with the naked eye.
✔ Liquid Dye Penetrant Testing: To detects surface cracks, leak      detection by using dye penetrants specially for Members of non-        magnetic materials such as aluminum.
✔ Ultrasonic Inspection of Metal Members: To detects both            surface and sub-surface flaws in metal members which are not          detected by other methods.
✔ Industrial Radiography Inspection: To detect microscopic  internal flaws such as cracks, porosity, blowholes, non-metallic inclusions, incomplete root penetration and undercutting in Metal  Structural Members by using x-ray.